Digital audio glossary

Look up the audio formats, cables and timing terms used throughout O²AT. Start with PCM and DSD for file formats, or TOSLINK, USB and I²S for connections between devices.

Audio formats

PCM
Pulse-code modulation. Think of it as a series of numbers describing the sound wave. A CD stores two channels of PCM at 16 bits per sample and 44,100 samples per second.
DXD
Digital eXtreme Definition. A high-rate form of PCM, conventionally 24-bit at 352.8 kHz, eight times the CD sample rate of 44.1 kHz. Double-rate DXD (2× DXD) is 705.6 kHz in that same family. The corresponding 48 kHz-family rates are 384 and 768 kHz PCM. Some manufacturers call these single- and double-rate DXD too. Typical TOSLINK equipment cannot carry any of these rates as-is.

In the studio, an engineer can convert DSD into DXD to edit, mix or adjust levels in Pyramix. See the Merging Technologies production guide.

2L recorded Marianne Thorsen’s Mozart Violin Concertos in DXD, then issued it on SACD and CD. Planets (The Original – Raw DXD Recording) is an example available to download as 24-bit DXD at 352.8 kHz.

Native playback of purchased 705.6 and 768 kHz PCM files was tested on three DACs. The playback results list the units tested so far. Other models may support both rates. See the manufacturer examples of playback and conversion modes.

Sample rate
How many times per second each channel is sampled. At 192 kHz, that is 192,000 samples per second per channel. A MHz is one million cycles per second.
Bit depth
How many bits describe each PCM sample. A device may send a 24-bit sample in a 32-bit slot. The slot size determines the space the sample occupies on the link.
DSD
Direct Stream Digital. A one-bit format that encodes the signal in a stream of very fast pulses. Conventional DSD64 uses 2.8224 million bits per second per channel. DSD512 and DSD2048 use progressively higher rates. The proposed O²AT DSD2048 rates are 90.3168 Mb/s per channel in the conventional family and 98.304 Mb/s per channel in a separately labelled 48 kHz-derived extension.
DoP
DSD over PCM. It packages DSD bits inside PCM-shaped words so compatible equipment can carry them through an interface that handles PCM. The DAC unpacks the DSD stream. The audio itself is still DSD.

Cables and connections

S/P-DIF
Sony/Philips Digital Interface. A way to send digital audio and its timing together. Consumer equipment commonly carries it over a TOSLINK optical lead or a coaxial cable with an RCA or BNC connector.
Toshiba’s optical audio connection, recognisable by its square, keyed plug. It commonly uses plastic fibre to carry S/P-DIF as light. The optical transmitter and receiver determine the usable rates.
AES3
A professional digital audio interface. The balanced electrical version commonly uses XLR connectors. AES3id is a 75 Ω coaxial variant commonly using BNC. The connector alone does not identify the signal it carries.
USB Audio Class (UAC)
The rules that let a computer and a USB audio device describe and exchange audio streams. The USB generation describes the underlying connection. Audio rates depend on the host, driver and device, and the two ends must agree on a supported format.
I²S
Inter-IC Sound. An interface originally designed for audio chips in the same device. It uses separate lines for audio data and timing. An external I²S connection needs compatible wiring and clock settings at both ends.
LVDS
Low-voltage differential signalling. Each signal travels on a pair of wires and the receiver reads the voltage difference between them. Some audio devices use LVDS to carry I²S over an HDMI-shaped connector with a manufacturer-specific pinout.
HDMI
High-Definition Multimedia Interface. It carries digital video, audio and control in HDMI equipment. Some audio devices reuse its plug shape for external I²S. The shared plug shape does not make the device an HDMI input or output.
SFP and SFP+
Small Form-factor Pluggable modules provide a removable connection to fibre or another supported medium. O²AT specifies qualified 1G optical SFP modules for its baseline. An optional 10G design can use suitable SFP+ hardware.
LC duplex fibre
A small optical connector pair, typically with one fibre for each direction. Both modules must support the chosen fibre and optical profile.
Ethernet Layer 2
The rules for sending Ethernet frames between nearby network interfaces. O²AT puts audio and control in its own Ethernet frames. The 1G Ethernet service rate includes more than just the audio carried in those frames.

Compare equipment interfaces and pinouts

Conversion and timing

DAC
Digital-to-analogue converter. It turns digital audio into an analogue signal that can be amplified and played.
DDC
Digital-to-digital converter. It bridges two digital interfaces while keeping the audio in digital form.
Jitter
Small variations in when a clock edge occurs. A DAC needs precise conversion timing. Arrival-time variation in network packets can be absorbed by a buffer while it has room and enough stored audio.
Clock discipline
Using a reference to keep a local clock running at the intended average rate. Equipment can agree on rate and still start its samples at different instants. O²AT has a local-clock baseline and an external-reference tier.
FIFO
First in, first out. A buffer that delivers audio in the order it arrived. It can smooth delivery variation within its capacity.
Receiver credits
Permission from the receiver to send audio up to a running limit. A repeated message repeats the limit, including space already reserved for audio in flight.
Galvanic isolation
A break in the conductive path between circuits. Fibre passes light across that boundary without joining the equipment grounds through the link. Other cables can still reconnect them.

Read about clocking and recovery