Specification · O2AT v0.2 · wire-version nibble 0x2

The proposal, its limits and its source.

A 1G SFP-centred Layer 2 optical audio transport proposal. The source document is an engineering draft for manufacturer and community review, not a ratified standard.

Read and download

One reviewed source, two formats.

The editable ODT and matching 45-page PDF in the launch package are preserved unchanged. The HTML reader below is generated from the same ODT.

ODT SHA-256: df21b57c…b5a00
PDF SHA-256: efc5e00a…e28f989

Source status

19 November 2026 · v0.2 engineering draft

Selected source: the bundled reference ODT supplied in O2AT_Launch. No newer matching O2AT ODT was found in the supplied project or broader local document search.

The standalone PDF copies in Downloads and Documents/O2AT differ editorially from the bundled ODT and proof. They are not published as the matching edition.

View the source and release manifest

What v0.2 proposes

Requirements are not test results.

  • Mandatory 1000BASE-X at 1.25 GBd, supplying a 1.000 Gb/s Ethernet MAC service, with the specified 1000BASE-SX 850 nm duplex LC optical profile.
  • Raw IEEE 802.3 Layer 2 framing inside one bridged domain. EtherType 0x88B5 remains experimental and limited to controlled evaluation.
  • A 12-byte o2at header, capability negotiation, cumulative receiver credits and a dual-clock FIFO.
  • PCM32 through the proposed 2,822.4/3,072 kHz families and packed native DSD through DSD2048, with a clearly identified 48 kHz-derived extension.
  • Optional 10G transport for aggregation and channel counts above the admitted 1G budget.
  • Receiver-owned conversion timing. Reference-tier 10 MHz input is required by the proposal; ordinary baseline operation uses the defined local-clock mode.

Negotiated transport capability does not imply that a particular source, USB bridge, DAC or output stage supports the format. No O2AT hardware implementation or measured result is claimed.

Analytical examples

Capacity with packet overhead included.

Decimal Mb/s; single VLAN tag, 125 µs target, Ethernet framing, preamble and inter-frame gap included.

Selected values from v0.2 Tables 9 and 10
FormatChannelsOccupied ratePolicy note
PCM32 / 48 kHz26.528 Mb/s1G admitted
PCM32 / 768 kHz252.608 Mb/s1G admitted
PCM32 / 3,072 kHz2203.9808 Mb/s1G admitted
PCM32 / 2,822.4 kHz8749.62944 Mb/s1G admitted
PCM32 / 3,072 kHz8815.9232 Mb/sPasses 85%, fails 80%
PCM32 / 3,072 kHz161,633.186909 Mb/s10G required

Scroll horizontally to read all columns.

Editorial record

Change and errata.

v0.2 · 19 November 2026

Moves the baseline to 1G SFP, doubles the earlier proposed maximum format rates, specifies exact integer rates and a 12-byte header, adds a precise receiver-paced credit model, and separates transport capability from installed DAC, USB and I²S limits.

v0.2 supersedes the incompatible earlier draft header. No separate errata record is published at launch. Suspected technical errors should be raised with a section reference and evidence; they are not silently corrected in the web copy.

Submit a versioned technical review →

Open licensing statements in the paper remain proposals. They do not imply certification, patent clearance or rights to third-party standards or IP cores.

Evidence boundary

Calculated values, not prototype measurements.

The v0.2 paper contains analytical packet-rate and buffer calculations. A public O2AT reference implementation, bitstream, hardware prototype, measured clock performance, independent interoperability run, formal peer review and standards approval have not been evidenced for this publication.

Tunji Durodola has reported successful DSD512 playback using existing LAiV equipment. That listening result is not evidence of an O2AT bridge or DSD2048 implementation.

See the proposed prototype acceptance programme →