Architecture
How audio moves from source to DAC.
O2AT sends audio in Ethernet frames over duplex fibre. At the receiver, an elastic buffer feeds the DAC at the rate set by its audio clock.
The physical baseline
A qualified 1G SFP link.
The mandatory baseline is 1000BASE-X at 1.25 GBd, providing a 1.000 Gb/s Ethernet MAC service after line coding. The v0.2 optical profile specifies 1000BASE-SX at 850 nm over duplex LC glass fibre. SFP+ / 10G is an optional expansion for aggregation and channel counts beyond an admitted 1G budget.
Optical fibre provides galvanic isolation across that link boundary. A separate coaxial reference, chassis bond or other connection may create a conductive path. Optical isolation must not be described as whole-system isolation without checking every connection.
O2AT is Layer 2. Ordinary IP routers do not route these frames. The proposal uses experimental EtherType 0x88B5 only for controlled evaluation; a commercial assignment and interoperability programme are still required.
A negotiated session
Agree before audio starts.
Endpoints advertise only formats they can accept, buffer and deliver at their physical outputs. The source and receiver exchange capabilities, session parameters and cumulative receiver-credit limits. A mode that fits the link can still be rejected when a connected DAC, USB interface or clock plan cannot support it.
PCM uses big-endian, left-aligned 32-bit containers. Native DSD is packed chronologically, most-significant bit first in 32-bit groups. Conventional 44.1 kHz-derived DSD and the explicit 48 kHz-derived extension are separately identified.
Frames failing FCS or syntax checks are discarded and counted. There is no mandatory retransmission of late audio. Loss, invalid active-stream state or underrun invokes the stream’s specified local mute/restart behaviour; unrelated malformed traffic must not mute an admitted stream.
Admission
Capacity is calculated per link.
For a packet containing G sample groups across C channels, the v0.2 payload is P = 4CG bytes. The packet grouping is limited by the 1,440-byte audio payload cap and a 125 µs packetisation target. Ethernet framing, padding, preamble and inter-frame gap are included in occupied wire rate.
Eight-channel PCM32 at 3.072 MHz occupies 815.9232 Mb/s with a VLAN tag on 1G. It passes the draft’s 85% direct-link policy threshold and fails an 80% threshold. Sixteen channels at that rate exceed 1G. This is a transport calculation, not an assertion that a DAC or host can deliver the format.
Engineering diagrams
Follow each workflow.
The workflow library contains editable diagrams for link setup, session negotiation, packet handling, clock control and proposed extensions. Each diagram carries its v0.2 or proposal status and a source link.