Explore · analytical tools

Change the inputs. See the budget move.

The bandwidth calculator applies v0.2 packetisation and Ethernet overhead. The FIFO lab illustrates finite-buffer behaviour and cumulative credit semantics. Neither tool represents measured O2AT hardware.

01 · Occupied wire rate

Bandwidth calculator

PCM uses sample groups per second. DSD uses 32-bit groups per channel. Rates are exact integer hertz in the calculation; rounding happens only for display.

Examples: PCM 48,000 or 3,072,000; DSD 90,316,800 bits/s.

Forward audio stream

—

—

—raw audio payload rate
—headroom to admission ceiling
—available MAC service
—unused capacity at this rate
—audio payload per packet
—O2AT protocol header per packet
—Ethernet overhead and padding per packet
—occupied byte-times per packet
—groups per packet
—packet interval, not playback latency
Assumes minimum Ethernet padding and one optional VLAN tag. Occupied time includes MAC header, FCS, preamble/SFD and inter-frame gap. The calculation compares with MAC service, not optical line rate. Reverse-direction credits are separate. Admission does not guarantee switch latency or endpoint support.

02 · Receiver timing

Clock and FIFO laboratory

An illustrative deterministic rate model. Choose an elastic source, a common-frequency live source, or an independent fixed-rate source and inspect the effect on finite buffer occupancy.

Positive fills the FIFO; negative drains it.

Simulation time
0.0 s Paused

Analytical margin
—

Lower / upper boundaries are protection limits, not audible-quality thresholds.

—producer rate
—receiver conversion-read rate
—FIFO occupancy
—upstream capture backlog in this model

OPEN

OPENCLOCK_VALIDPREFILLRUNNINGHOLDOVERMUTE / ABORT

Seeded illustrative packet arrival offsets (milliseconds, ±3% around a 125 µs interval):

This is an illustrative buffer and rate-control model. It does not model oscillator phase noise, PLL transfer functions, analogue coupling or audibility, and it is not measured O2AT hardware performance.

Packet arrival is causal. Data in flight remain included in cumulative sent-end limits. This simplified lab illustrates rate drift and credit bounds; it is not a complete wire-protocol simulator.

03 · Header example

A packet, byte by byte.

The v0.2 paper’s worked 12-byte header is shown with its session counter and sequence field.

This is a labelled example from the draft, not a captured O2AT hardware packet.